Featured

  • Wholesale Fuse Base With Indicator Light Suppliers – 
 Cylindrical Fuse Holders – Mersen

    Wholesale Fuse Base With Indicator Light Suppliers – Cylindrical Fuse Holders – Mersen

    Applications These fuse holders are supporters for fuses with size up to 22 58mm, Then are capable of working under heat caused by lt can also function as a fuse disconnecting switch by multi-phase combination. There are two in/out lines at the RT18N fuse base, providing a power cut function. The RT18L type has a safety lock the fuse carrier when disconnected to avoid wrong operation, it can also be equipped with an indicator, which goes on when the fuse link breaks. Rated insulate voltage up...
  • Bolt Connected Fuse Links Manufacturers – 
 Bolt Connected Fuse Links – Mersen

    Bolt Connected Fuse Links Manufacturers – Bolt Connected Fuse Links – Mersen

    Applications Protection against overload and short-circuit in electric lines(type gG), also available for protection of semiconductor parts and equeipment against short-circuit (type aR) and protectionof motors (type aM).Rated voltage up to 1200V, Rated current up to 630A, Workingfrequency 50Hz AC, Rated breaking capacity up to 80KA. Compliant with Gb13539 and IEC60269. Design Features Variable cross-section fuse element made from pure copper or silver sealed in cartridge made from ...
  • Bolt Connected Fuse Links Manufacturer – 
 Bolt Connected Round Cartridge Type Fast-acting Fuse Links For Semiconductor protection – Mersen

    Bolt Connected Fuse Links Manufacturer – Bolt Connected Round Cartridge Type Fast-acting Fuse Links For Semiconductor protection – Mersen

    Applications This series of uses are mainly used in circuits of AC 50Hz, rated voltage of 1500V and rated current of 1000A, to protect the semiconductor components and the whole unit from short circuit. The breaking capacity of the fuses is up to 100kA The fuses are compliant with the IEC60269-1 IEC60269-4 and GB13539.1 GB/T13539.4. Design Features The variable cross-section fuse element made of pure silver sheets are sealed in the melting tube made of epoxy glass fibre which is hea...
  • Wholesale Fuse Links Manufacturer – 
 Non-Filler Renewable Fuse Links – Mersen

    Wholesale Fuse Links Manufacturer – Non-Filler Renewable Fuse Links – Mersen

    Applications Protection against overload and short-circuit in electric lines (type gG). Rated voltage up to 250V/600V; Rated current up to 200A; Working frequency 50Hz AC; Rated breaking capacity up to 10kA. Compliant with Gb13539. Design Features Cylindrical cap contacts for rated current up to 60A, and knife contacts for rated current up to 600A, Variable cross-section fuse element made from zinc alloy. Users can replace the burnt fuse element easily and use the fuse again. Basic Data The m...
  • China High Quality Fuse Base Switch Factory – 
 Cylindrical Fuse Holders – Mersen

    China High Quality Fuse Base Switch Factory – Cylindrical Fuse Holders – Mersen

    Applications These fuse holders are supporters for fuses with size up to 22 58mm, Then are capable of working under heat caused by lt can also function as a fuse disconnecting switch by multi-phase combination. There are two in/out lines at the RT18N fuse base, providing a power cut function. The RT18L type has a safety lock the fuse carrier when disconnected to avoid wrong operation, it can also be equipped with an indicator, which goes on when the fuse link breaks. Rated insulate voltage up...
  • China High Quality Bolt Connected Round Cartridge Type Fast-Acting Fuse Links For Semiconductor Protection – 
 Bolt Connected Fuse Links – Mersen

    China High Quality Bolt Connected Round Cartridge Type Fast-Acting Fuse Links For Semiconductor Protection – Bolt Connected Fuse Links – Mersen

    Applications Protection against overload and short-circuit in electric lines(type gG), also available for protection of semiconductor parts and equeipment against short-circuit (type aR) and protectionof motors (type aM).Rated voltage up to 1200V, Rated current up to 630A, Workingfrequency 50Hz AC, Rated breaking capacity up to 80KA. Compliant with Gb13539 and IEC60269. Design Features Variable cross-section fuse element made from pure copper or silver sealed in cartridge made from ...
  • China High Quality Fuse Monitoring Devices Factory – 
 Fuse monitoring devices – Mersen

    China High Quality Fuse Monitoring Devices Factory – Fuse monitoring devices – Mersen

    Applications This series of Fuse monitoring devices are used in electric lines of 50Hz AC and rated voltage up to 1000V as melting signal / siren for the fuse links. Design Features It is made up of the following parts:1. Melt striker, 2. Micro switch (with one normal close contact and one normal open contact), 3. A base for the striker and the switch. Fuse monitoring devices are usually paralleled under the lid fastening screws at the ends of the fuse. When the fuse breaks, the str...
  • Wholesale Bolt Connected Round Cartridge Type Fast-Acting Fuse Links For Semiconductor Protection – 
 Bolt Connected Fuse Links – Mersen

    Wholesale Bolt Connected Round Cartridge Type Fast-Acting Fuse Links For Semiconductor Protection – Bolt Connected Fuse Links – Mersen

    Applications Protection against overload and short-circuit in electric lines(type gG), also available for protection of semiconductor parts and equeipment against short-circuit (type aR) and protectionof motors (type aM).Rated voltage up to 1200V, Rated current up to 630A, Workingfrequency 50Hz AC, Rated breaking capacity up to 80KA. Compliant with Gb13539 and IEC60269. Design Features Variable cross-section fuse element made from pure copper or silver sealed in cartridge made from ...
  • Auto Fuse Link Suppliers – 
 Round Cartridge Fuse Links With Knife Contacts – Mersen

    Auto Fuse Link Suppliers – Round Cartridge Fuse Links With Knife Contacts – Mersen

    Applications Protection against overload and short-circuit in electric line sand equipments (type gG), also available for protection of motors (type aM).Rated voltage up to 600V; Rated current up to 630A; Working frequency 50Hz AC; Rated breaking capacity up to 100kA.Compliant with GB13539 and IEC60269. Design Features Variable cross-section fuse element made from pure metal sealed in cartridge made from high temperature resistant epoxy glass. Fuse tube filled with chemically treated high-pur...
  • 63a Fuse Carrier Manufacturer – 
 Fuse Carrier (Handle) – Mersen

    63a Fuse Carrier Manufacturer – Fuse Carrier (Handle) – Mersen

    Applications Protection against overload and short-circuit in electric lines(type gG), also available for protection of semiconductor parts and equipments against short-circuit (type aR) and protection of motors (type aM). Design Features Variable cross-section fuse element made from pure copper or silver sealed in cartridge made from high-duty ceramic, Fuse tube filled with chemically treated high-purity quartz sand as arc-extinguishing medium. Dot-welding of fuse element ends to t...
  • Fuse Monitoring Devices Supplier – 
 Fuse monitoring devices – Mersen

    Fuse Monitoring Devices Supplier – Fuse monitoring devices – Mersen

    Applications This series of Fuse monitoring devices are used in electric lines of 50Hz AC and rated voltage up to 1000V as melting signal / siren for the fuse links. Design Features It is made up of the following parts:1. Melt striker, 2. Micro switch (with one normal close contact and one normal open contact), 3. A base for the striker and the switch. Fuse monitoring devices are usually paralleled under the lid fastening screws at the ends of the fuse. When the fuse breaks, the str...
  • Wholesale Bolt Connected Round Cartridge Type Fast-Acting Fuse Links For Semiconductor Protection – 
 Bolt Connected Square Pipe Type Fast-acting Fuse Links For Semiconductor protection  R...

    Wholesale Bolt Connected Round Cartridge Type Fast-Acting Fuse Links For Semiconductor Protection – Bolt Connected Square Pipe Type Fast-acting Fuse Links For Semiconductor protection – Mersen

    Applications This series of fuses are mainly used in circuits of AC 50Hz, rated voltage of 2000V and rated current of 2500A, to protect the semiconductor components and the whole unit from circuit short (aR). The breaking capacity of the fuses is up to 100kA. The fuses are compliant with the IEC60269-1 / IEC60269-4 and GB13539.1 / GB/T13539.4. Design Features The variable cross-section fuse element made from pure silver sheets are sealed in the melting tube made of high-density porc...
123456 Next > >> Page 1 / 419